Hand Files & Rasps
10"(250mm) 1RE Bastard Cut Mill File
TCF0250
- Advanced Carbon Steel T12, Handle: PP+TPR
- One Round Edge
- Bastard cut, Uniform insection size, Sharp-lines, Bulk heat treatment HRC45-55
- Rust-proof treatment
- Full length 36.5mm, Width 24mm, Thickness 4.8mm
10"(250mm) Half Round Wood Rasp
TCF7250
- Half Round / Alloy Steel
- Bastard Cut: Coarse - Use for soft surfaces
- Second Cut: Less coarse - Use for harder surfaces
- Smooth Cut: Very fine - Use for harder surfaces, gives finer finish
10"(250mm) Second Cut Flat File
TCF2252
- Second Cut: Less coarse - Use for harder surfaces
- Second Cut
- 10"
10"(250mm) x 3/16" Chain Saw File
TCF9400
- Bastard Cut: Coarse - Use for soft surfaces
- Second Cut: Less coarse - Use for harder surfaces
- Smooth Cut: Very fine - Use for harder surfaces,gives finer finish
12"(300mm) 1RE Bastard Cut Mill File
TCF0300
- Advanced Carbon Steel T12, Handle: PP+TPR
- One Round Edge
- Bastard cut, Uniform insection size, Sharp-lines, Bulk heat treatment HRC45-55
- Rust-proof treatment
- Full length 37.8cm, Width 27.3cm, Thickness 0.64cm
12"(300mm) x 5/32" Chain Saw File
TCF9500
- Bastard Cut: Coarse - Use for soft surfaces
- Second Cut: Less coarse - Use for harder surfaces
- Smooth Cut: Very fine - Use for harder surfaces,gives finer finish
8"(200mm) x 7/32" Chain Saw File
TCF9300
- Bastard Cut: Coarse - Use for soft surfaces
- Second Cut: Less coarse - Use for harder surfaces
- Smooth Cut: Very fine - Use for harder surfaces,gives finer finish
Crescent Nicholson 06601NN Hand File
C143-33351
- One side is single cut for tool sharpening and smoothing metal surfaces
- Reverse side is double-cut for general filing and rapid stock removal
- Reverse side is double-cut for general filing and rapid stock removal
- One cut edge and one safe edge
- Length measured exclusive of handle
Crescent Nicholson 14224MN Slim File, Triangular Profile, American Taper Pattern, Single Cut, 6 in L
C143-33489
- American pattern taper file
- Expertly made to effectively file saws with 60 deg angle teeth
- Expertly made to effectively file saws with 60 deg angle teeth
- Triangular shape makes accessing tight internal angles and squaring corners easy
- Single-cut construction is ideal for sharpening tools, finish filing and draw filing
Crescent Nicholson 19136N Rasp, Tang Handle
C143-21969
- For use on wood and soft metals
- For wood workers, hobbyists and plumbers
- For wood workers, hobbyists and plumbers
Crescent Nicholson 21467 File Card and Brush, 10 in L, Steel/Wood
C143-21467
- Two styles - file card for general cleaning of file teeth and file card/brush especially for use on finer cut files
- For general cleaning of file teeth
- For general cleaning of file teeth
Crescent Nicholson 21474H/21474 File Handle with Inserts, 4-1/2 in L, Plastic
C143-18623
- Interchangeable cushion inserts are designed to fit most popular files
- Rubber coated ergonomic shape for better comfort and control
- Rubber coated ergonomic shape for better comfort and control
- Rear taper, wide middle and flared neck increases push force
- For straight, lathe and draw filing
Crescent Nicholson 21825NN File, Rectangular Profile, American Mill Pattern, Bastard, Single Cut
A123-24350
- For sharpening mill or circular saws
Crescent Nicholson 21832NN File, Mill Pattern, Tang Handle
C143-33352
- Single cut on sides and edges
- Two square edges
- Two square edges
- All sizes taper slightly in width
- For sharpening mill or circular saws
Crescent Nicholson 21839N File, Flat Profile, American Mill Pattern, Bastard Cut
C143-33349
- Bastard cut, American pattern mill file
- Sharpens mill or circular saws
- Sharpens mill or circular saws
- Great for draw filing and finishing metals
- Rectangular shape lets you smooth and sharpen straight surfaces
Crescent Nicholson 21842NN File, Rectangular Profile, American Mill Pattern, Bastard, Single Cut
C143-33350
- For draw filing and finishing metals