Need More Help? 718-499-1119
Search
Water Heaters
aqua-dynamic 168-003 Dielectric Union, 1/2 in, Female x Solder, Steel
A171-68003
- Prevents electrolysis or galvanic action when connecting dissimilar materials
- For use with water up to 210 deg F
- For use with water up to 210 deg F
- Threaded ends comply with ANSI B1.20.1
- Solder ends comply with ANSI B16.18
Bosch Z-Flex Series 2SVEDTK24 Condensate Drain Tube Kit, Silicone
B083-02839
- 24 in condensate drain kit for all vertical and horizontal installations greater than 5' in total length in any direction. Tube is made of 3/8 inid high temp silicon to prevent corrosion
- Fill with water to prevent gases from coming out
- Fill with water to prevent gases from coming out
- Tubing should be fed into a drain or bucket through some form of piping
- Amount of water that comes through drain is limited
Bosch Z-Flex Series 2SVEEWCF0390 Z-Vent Water Heater Elbow, Stainless Steel
B083-02323
- Designed for use with boilers, high efficiency gas and oil heaters and water heaters where cool flue gases are vented under pressure
- Z-vent contains a built-in, fail-safe gasket and locking band connection
- Z-vent contains a built-in, fail-safe gasket and locking band connection
- No sealant is required
- No sealant is required
BrassCraft Copper-Flex WB00-12N Water Heater Connector, 3/4 in, FIP, Copper, 12 in L
B090-08928
- Corrugated copper tube
- Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion
- Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion
- No dielectric union needed, the integrated dielectric sleeve eliminates the need to install an additional dielectric union, reducing time and installation costs
- Requires less torque to seal with a pliable Nitrile rubber washer, especially on rough nipple surfaces
BrassCraft Copper-Flex WB00-15N Water Heater Connector, 3/4 in, FIP, Copper, 15 in L
B090-08930
- Corrugated copper tube
- Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion
- Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion
- No dielectric union needed, the integrated dielectric sleeve eliminates the need to install an additional dielectric union, reducing time and installation costs
- Requires less torque to seal with a pliable Nitrile rubber washer, especially on rough nipple surfaces
BrassCraft Copper-Flex WB00-18N Water Heater Connector, 3/4 in, FIP, Copper, 18 in L
B090-08933
- Corrugated copper tube
- Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion
- Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion
- No dielectric union needed, the integrated dielectric sleeve eliminates the need to install an additional dielectric union, reducing time and installation costs
- Requires less torque to seal with a pliable Nitrile rubber washer, especially on rough nipple surfaces
BrassCraft Copper-Flex WB00-24N Water Heater Connector, 3/4 in, FIP, Copper, 24 in L
B090-08934
- Corrugated copper tube
- Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion
- Patented internal dielectric sleeve effectively isolates dissimilar metals within the waterway to prevent galvanic corrosion
- No dielectric union needed, the integrated dielectric sleeve eliminates the need to install an additional dielectric union, reducing time and installation costs
- Requires less torque to seal with a pliable Nitrile rubber washer, especially on rough nipple surfaces
CAMCO 11360 Recyclable Drain Pan, Plastic, For: Electric Water Heaters
C109-11360
- Durable no-break polypropylene pans will not rust, corrode or crack
- Pre-cut side opening for drain fitting
- Pre-cut side opening for drain fitting
- Pre-cut side opening for drain fitting
Danco 88493 Supply Line Washer, Rubber, Black
D080-88493
- Washer will help restore a leaky water heater
- Designed to be used with a 3/4 in Dia supply connector to seal the connection
- Designed to be used with a 3/4 in Dia supply connector to seal the connection
- Replacing worn out washers will help prevent leaks
- Easy to install
EZ-FLO WaterFlex 0437012 Water Heater Connector, 3/4 in, FIP, Stainless Steel, Stainless Steel, 12 i
E064-37866
- Nickel plated brass nuts
- Nitrile rubber sealing washer
- Nitrile rubber sealing washer
EZ-FLO WaterFlex 0437018 Water Heater Connector, 3/4 in, FIP, Stainless Steel, Stainless Steel, 18 i
E064-37868
- Nickel plated brass nuts
- Nitrile rubber sealing washer
- Nitrile rubber sealing washer
EZ-FLO WaterFlex 0437024 Water Heater Connector, 3/4 in, FIP, Stainless Steel, Stainless Steel, 24 i
E064-37869
- Nickel plated brass nuts
- Nitrile rubber sealing washer
- Nitrile rubber sealing washer
EZ-FLO WaterFlex 0437118 Water Heater Connector, 3/4 in, FIP, Stainless Steel, Stainless Steel, 18 i
E064-38390
- Nickel plated brass nuts
- 1 blue and 1 red connector for easy installation
- 1 blue and 1 red connector for easy installation
- Sold and priced by the pair
EZ-FLO WaterFlex 0437124 Water Heater Connector, 3/4 in, FIP, Stainless Steel, Stainless Steel, 24 i
E064-38393
- Nickel plated brass nuts
- 1 blue and 1 red connector for easy installation
- 1 blue and 1 red connector for easy installation
- Sold and priced by the pair
FLUIDMASTER B1H12 High-Flexible Water Heater Connector, 3/4 in, FIP, Stainless Steel, Nickel, 12 in
F046-00313
- Exceptional flexibility for fast and easy installation
- Won't kink or crease, even in the tightest of spaces
- Won't kink or crease, even in the tightest of spaces
- Heavy-duty brass hex nuts are easy to grip and nickel-plated for durability
- Exceeds all code requirements for flexible water connectors
FLUIDMASTER B4H18 High-Flexible Water Heater Connector, 3/4 in, FIP x Compression, Stainless Steel,
F046-00311
- Exceptional flexibility for fast and easy installation
- Won't kink or crease, even in the tightest of spaces
- Won't kink or crease, even in the tightest of spaces
- Heavy-duty brass hex nuts are easy to grip and nickel-plated for durability
- Exceeds all code requirements for flexible water connectors
HOLDRITE Quick Strap Series QS-50 Water Heater Strap, Steel, For: Up to 80 gal Water Heaters
H066-90150
- The most tested and recognized water heater seismic restraint
- Galvanized water heater strap in box
- Galvanized water heater strap in box
- The Quick Link system allows for full adjustment from the front side of the water heater
- For seismic support of water heaters
HOLDRITE Quick Strap Series QS-50-D Water Heater Strap, Steel, White, For: Up to 80 gal Water Heater
H066-90154
- The most tested and recognized water heater seismic restraint
- The Quick Link system allows for full adjustment from the front side of the water heater
- The Quick Link system allows for full adjustment from the front side of the water heater
- Powder-coated steel water heater strap with (2) safety caps
- For seismic support of water heaters
Intermatic WH40 Water Heater Timer
I036-00740
- Convenient external override switch
- Convenient external override switch
Payment options
