Need More Help? 718-499-1119
Search
Hand Tools
Crescent CODE RED DB18X Pry Bar, 18 in L, Flat End, Nail Slot Tip, Steel, Black, 4-1/8 in W
W006-25786
- Head indexes over 180 deg and locks in 16 positions
- Head has raised striking surface that allows for striking to loosen and penetrate
- Head has raised striking surface that allows for striking to loosen and penetrate
- Angles head with nail slot for prying and pulling nails and boards
- Durable two-tone grip provides comfort, control and safety
BIT CHISEL SCALING 3IN
S204-24649
- Wide chisel design for quick and easy chiseling and breaking
- Ideal for removing large quantities of material
- Ideal for removing large quantities of material
Industrial Choice Precision Line Marking Paint, Flat/Matte Orange, 20 oz Aerosol Can
R031-11273
- Resists early fading and chalking.
- Precision tip with virtually no overspray.
- Adheres to hot surfaces; can be sprayed in the cold (to 25F).
- Dries in under five minutes.
PACTOOL SNAPPER SHEAR 200 SS204 Siding Shear, 4.8 A, 5/16 in Cutting Capacity
P192-20400
- Designed to cut fiber-cement siding up to 5/16 in thick
- Smooth, fast cuts with no airborne dust, keeping the job OSHA compliant with easy clean-up
- Smooth, fast cuts with no airborne dust, keeping the job OSHA compliant with easy clean-up
- Reversible blades machined from solid tool steel need less replacements, durable enough for 20,000 ft of cutting
- Cut with painted side face down for ideal, finished edges
PACTOOL SS424 Backerboard Shear, 6.5 A, 1/2 in Cutting Capacity
P192-42400
- Snapper shear cuts up to 1/2 in thick Hardiebacker fiber cement underlayment
- Unique backerboard shear design allows for both indoor and outdoor operation
- Unique backerboard shear design allows for both indoor and outdoor operation
- Use indoors without covering the house in dust, easy clean up
- When the snapper shear is used to cut fiber cement, compared to using score-and-snap, with less broken corners
MILWAUKEE ELEC TOOL 48-22-4522 Right Offset Snips
M076-50366
- Forged serrated blades bolt lock
- Flush pivot bolt
- Flush pivot bolt
- Features ergonomic grips
- Up to 22 ga stainless, 18 ga cold-rolled steel
Milwaukee 48-22-9508 Ratchet and Socket Set, Alloy Steel, Chrome, Specifications: 3/8 in Drive Size,
M076-50465
- Most versatile sockets anti-roll, wrench-ready
- FOUR FLAT sides feature wrench-ready design
- FOUR FLAT sides feature wrench-ready design
- Removable inner tray specifically designed for steel storage case
- Stamped socket sizes
National Hardware N889-013 Wire Cable Clamp, 1/8 in Dia Cable, 7/8 in L, Malleable Iron/Steel, Elect
N042-02328
- Malleable iron saddle with steel U-bolt and nuts
- Anchoring point for webbing or strap
- Anchoring point for webbing or strap
- For quick attachment and forming an eye or loop on wire rope, interior or exterior use
Industrial Choice M1600/M1800 System Precision-Line Inverted Marking Paint, 17 oz, Safety Red, M1800
R031-11276
- Creates accurate, easy-to-read markings in bright, durable colors
- Precision tip, virtually no overspray
- Resists early fading and chalking
- Adheres to hot surfaces, can be sprayed in the cold (to 25 F)
- Dries in under 5 minutes
STANLEY 10-179 Utility Knife, 2-7/16 in L Blade, 3 in W Blade, HCS Blade, Contour-Grip Handle, Green
S001-10179
- High-visibility green is easy to find in tool box or work area
- Interlocking overlap nose secures blade safely between knife halves
- Interlocking overlap nose secures blade safely between knife halves
- Heavy-duty metal body for durability
- Three-position retractable blade
DeWALT DWHT47374L/144 Chalk Reel Kit, 100 ft L Line, Red Line, 3:1 Gear Ratio
D075-47374
- 1/4 turn cap for a secure fit
- Ergonomic shape for secure grip and feel
- Ergonomic shape for secure grip and feel
- Overmold grip for slip resistance and drop protection
- 1 mm line for tight, clean marks
DeWALT DWMT73810 Wrench Set, 8 -Piece, Polished Chrome, Specifications: Metric Measurement
D075-73810
- Sizes stamped twice on both sides of wrench handle for easier size identification
- 13 deg offset box end for knuckle clearance
- 13 deg offset box end for knuckle clearance
- 15 deg offset open end allows an increased range of arc swing in tight spaces
- Stamped hashmark pattern on wrench handle provides added grip points
DeWALT DWMT75197OSP Combination Wrench, Metric, 7 mm Head, 5-3/32 in L, 12 -Point, Chrome, Comfort-G
D075-75197
- Long panel design gives more torque during use
- 15 deg offset box end for knuckle clearance
- 15 deg offset box end for knuckle clearance
- Stamped hashmark pattern on wrench handle helps provide added grip points
- Sizes stamped twice on both sides of wrench handle for easy size identification
Crescent Pro Series PS5429C Cutting Plier, 8 in OAL, 11 AWG Cutting Capacity, Blue/Gray Handle, Ergo
C643-21684
- Co-molded grips for added comfort
- Increase cutting pressure by 50%
- Increase cutting pressure by 50%
- Chrome vanadium steel for increased durability
- Heat treated joint rivet for smooth and consistent operation
Crescent AC24VS Adjustable Wrench, 4 in OAL, 1/2 in Jaw, Steel, Chrome
C643-25397
- The original adjustable wrench, made by the world-famous Crescent brand
- Laser etched scale in both SAE standard and metric sizes allows easy identification
- Laser etched scale in both SAE standard and metric sizes allows easy identification
- Larger knurl for easy adjustment ensures a tight jaw fit
- Hex jaw design reduces slippage by gripping fasteners tightly
Crescent Z2 K9 Series RTZ28CGV Tongue and Groove Plier, 8-1/2 in OAL, 1.6 in Jaw, Self-Locking Adjus
C643-33871
- Slim jaws provide 40% greater access
- Aggressive tooth design increases torque transfer
- Aggressive tooth design increases torque transfer
- 8-jaw positions for more flexibility, grip comfort and jaw capacity
- Ergonomic handles with tether point increase overall comfort and safety
Crescent K9 Z2 Series RTZ28CG Tongue and Groove Plier, 8-1/2 in OAL, 1.6 in Jaw Opening, Black/Rawhi
C643-33872
- K9 jaw design provides a strong grip, even when on a 35 deg angle
- Slim jaws provide 40% greater access
- Slim jaws provide 40% greater access
- Aggressive tooth design increases torque transfer
- Eight jaw positions for more flexibility, grip comfort and jaw capacity
Crescent K9 Z2 Series RTZ210CG Tongue and Groove Plier, 10.8 in OAL, 2.1 in Jaw, Black/Rawhide Handl
C643-33875
- K9 jaw design provides a strong grip, even when on a 35 deg angle
- Slim jaws provide 40% greater access
- Slim jaws provide 40% greater access
- Aggressive tooth design increases torque transfer
- Eight jaw positions for more flexibility, grip comfort and jaw capacity
Crescent Z2 K9 Series RTZ212CG Tongue and Groove Plier, 12.8 in OAL, 2.6 in Jaw, Black/Rawhide Handl
C643-33879
- Slim jaws provide 40% greater access
- Aggressive tooth design increases torque transfer
- Aggressive tooth design increases torque transfer
- 8-jaw positions for more flexibility, grip comfort and jaw capacity
- Grip Zone handles for non-marring grip
Crescent Z2 K9 Series RTZ212CGV Tongue and Groove Plier, 12.8 in OAL, 2.6 in Jaw, Self-Locking Adjus
C643-33880
- Slim jaws provide 40% greater access
- Aggressive tooth design increases torque transfer
- Aggressive tooth design increases torque transfer
- 8-jaw positions for more flexibility, grip comfort and jaw capacity
- Grip Zone handles for non-marring grip
Crescent Z2 K9 Series RTZ216 Tongue and Groove Plier, 16-1/2 in OAL, 4.2 in Jaw, Rawhide Handle, 2-1
C643-33883
- Slim jaws provide 40% greater access
- Aggressive tooth design increases torque transfer
- Aggressive tooth design increases torque transfer
- 10-jaw positions for more flexibility, grip comfort and jaw capacity
- Ergonomic handles increase overall comfort
Crescent Z2 K9 Series RTZ2CGSET2 Tongue and Groove Plier Set, 2-Piece, Alloy Steel, Black/Rawhide, P
C643-34089
- Slim jaws provide 40% greater access
- Aggressive tooth design increases torque transfer
- Aggressive tooth design increases torque transfer
- 8-jaw positions for more flexibility, grip comfort and jaw capacity
- Grip Zone handles for non-marring grip
Crescent CODE RED Series MB10 Pry Bar, 10 in L, Ground Tip, Steel, Red, 3-1/4 in W
C643-25784
- Striking face has ground surface for precision nailing
- Precision ground ends for nail pulling with less material damage
- Precision ground ends for nail pulling with less material damage
- Nail slot in both claw and pry ends for access to pulling
- Durable high-visibility red finish is corrosion-resistant
Payment options
