Multinautic branded products
Sort by
M137-10002
- Holes of size 7/16 in x 3/4 in
- Center to center distance of 3-1/2 in
- Center to center distance of 3-1/2 in
- Needs 3/8 in bolts
M137-10007
- Holes of size 7/16 in x 3/4 in
- Center to center distance of 3-1/2 in
- Center to center distance of 3-1/2 in
- Needs 3/8 in bolts
- Male tab is 3/8 in and female tab is 1/4 in
M137-10001
- Holes of size 7/16 in x 3/4 in
- Center to center distance of 3-1/2 in
- Center to center distance of 3-1/2 in
- Needs 3/8 in bolts
- Needs 3/8 in bolts
M137-13301
- Holes of size 9/16 in x 1 in
- Center to center distance of 3-1/2 in
- Center to center distance of 3-1/2 in
- Needs 1/2 in bolts
- For use to produce a radius at the edge of a concrete slab to help prevent the end from chipping off
M137-10111
- Holes of size 7/16 in x 3/4 in
- Center to center distance of 3-1/2 in
- Center to center distance of 3-1/2 in
- Needs 3/8 in bolts
- Needs 3/8 in bolts
M137-11005
- Maintain floating docks in position with multianchoring leg holders used as pile guides
- For supporting a stationary dock or a gangway
- For supporting a stationary dock or a gangway
- Maintain floating docks in position with multi-anchoring leg holders used as pile guides
- Finish; Galvanized Steel
M137-15014
- Comfortable wooden handle
- For installing on leg pile and holder to protect boats against impacts
- For installing on leg pile and holder to protect boats against impacts
M137-14029
- Made of tough virgin polyethylene with UV inhibitors to prevent damage from the sun, debris, oil, gas, marine organisms, salt and fresh water
- Made of tough virgin polyethylene with UV inhibitors to prevent damage from the sun, debris, oil, gas, marine organisms, salt and fresh water
M137-15110
- Slides perfectly in the Unitrack system using T-bolts (#22080)
- The 22 deg angle makes them stay away from boat hull
- The 22 deg angle makes them stay away from boat hull
- For many dockline sizes and to facilitate mooring
M137-15503
- Non-slip step
- Sturdy tubular handrails
- Sturdy tubular handrails
- Step dimension of 16 in x 3-1/2 in
- For floating or stationary docks
M137-15200
- Blade made of stainless steel with sturdy steel mounting
- Properly shaped bit and leading edge cuts a sharp groove
- Properly shaped bit and leading edge cuts a sharp groove
- Resilient DuraSoft handle provides a soft feel, reduces fatigue and offers excellent durability
- Resilient DuraSoft handle provides a soft feel, reduces fatigue and offers excellent durability
M137-15529
- For mixing mortar and cement
- Turns a ladder into a flip-up one-to easily remove from water when needed
- Turns a ladder into a flip-up one-to easily remove from water when needed
- Aluminum finish, easy care and cleaning
- Easily removes from water
M137-21111
- Comfortable wooden handle
- For use to produce a radius at the edge of a concrete slab to help prevent the end from chipping off
- For use to produce a radius at the edge of a concrete slab to help prevent the end from chipping off
- Ultra Lite marine grade aluminum structure with a built-in track system for the quick-connect and disconnect of accessories
- Lightweight strong durable, easy to adjust, will never rust in water or become waterlogged like a conventional wooden dock
M137-22080
- Great for use as a tote, a party cooler with ice for drinks or any activity requiring sturdy, heavy-duty tubs
- For installing some accessories into multinautic's unitrack system
- For installing some accessories into multinautic's unitrack system
M137-34106
- Installed with 3/8 in Dia bolts
- Install on top edge of your dock to pull up a canoe or a kayak out of the water
- Install on top edge of your dock to pull up a canoe or a kayak out of the water
- For protecting boats or PWCs keel when boarding on a ramp or a trailer
- Finish; Stainless Steel
M137-35010
- Cleats are also very light
- Needs two #12 x 3 in wood screws for installation
- Needs two #12 x 3 in wood screws for installation
- Needs two #12 x 3 in wood screws for installation
M137-13303
- Holes of size 9/16 in x 1 in
- Center to center distance of 3-1/2 in
- Center to center distance of 3-1/2 in
- Needs 1/2 in bolts
- Heavy-duty, 3/4 in pin
M137-15113
- Flip down when not in use
- Aluminum flip-up cleat is both aesthetic and safe with its round corners and smooth surface
- Aluminum flip-up cleat is both aesthetic and safe with its round corners and smooth surface
- Aluminum flip-up cleat is both aesthetic and safe with its round corners and smooth surface
M137-34900
- Double braided with pre-spliced loop
- For boats up to 20 ft
- For boats up to 20 ft
- Designed for strength and flexibility
- Use to moor your boat