Need More Help? 718-499-1119
Search
Power Tools
DeWALT DW2720 Drill Bit, 3/32 in Dia, 5 in OAL, Flip Drive, 4-Flute, 3/32 in Dia Shank
D075-31938
- Replacement drill bits with countersinks provide a less costly solution to replacing the entire unit
- Split point drill bits start on contact
- Split point drill bits start on contact
- Black oxide coating prevents rust
- Black oxide coating prevents rust
DeWALT DW1931 Drill Bit, 31/64 in Dia, 5.98 in OAL, Spiral Flute, 3-Flat Shank
D075-32404
- Pilot-Point tip starts on contact for clean, accurate holes and reduces lock-up on breakthrough
- Tapered web provides greater durability to reduce breaking
- Tapered web provides greater durability to reduce breaking
- No-spin shank eliminates the frustration of bit spinning in the chuck
- Size markings are located above the shank to prevent wearing away
DeWALT DWASHRIR Shear Attachment, Plastic, Black/Yellow
D075-41374
- Cuts up to 18 GA material including but not limited to sheet metal, corrugated sheet metal, duct, asphalt shingles, steel mesh, vinyl siding, wire, plastics, cardboard and rubber
- 1/4 in hex shank
- 1/4 in hex shank
- 360 deg swivel head allows for maneuverability when cutting
- Works with most 18 to 20 V impact driver and drill tool brands
DeWALT DWA1205 Drill Bit, 5/64 in Dia, 2 in OAL, Parabolic Flute, 3-Flat Shank
D075-41072
- Maximum speed and life in stainless steel and other hard metals
- Pilot point and split tip design starts on contact and eliminates bit walking
- Pilot point and split tip design starts on contact and eliminates bit walking
DeWALT DWA1214 Drill Bit, 7/32 in Dia, 3-3/4 in OAL, Parabolic Flute, 3-Flat Shank
D075-41080
- Maximum speed and life in stainless steel and other hard metals
- Pilot point and split tip design starts on contact and eliminates bit walking
- Pilot point and split tip design starts on contact and eliminates bit walking
DeWALT DW713 Miter Saw, 120 V, 15 A, 10 in Dia Blade, 2 x 6 in 45 deg, 4 x 4 in at 90 deg Cutting Ca
D075-57081
- Tall sliding fences support crown molding vertically 4-1/2 in and easily slides out of the way for bevel cuts
- Cam miter lock for quick and accurate miter table positioning
- Cam miter lock for quick and accurate miter table positioning
- 0 to 50 deg left and right miter capacity for greater versatility
- Lightweight 35 lb with built-in carrying handle for increased portability
DeWALT D28715 Chop Saw, 120 V, 15 A, 14 in Dia Blade, 4-1/2 x 6-1/2 in Rectangular, 5 in Round Cutti
D075-57104
- Powerful 15 A/5.5 hp motor provides more overload capacity, while increasing performance and durability
- Exclusive Quick-Fence is a 45 deg, adjustable fence designed for fast and accurate angle cuts without using a wrench
- Exclusive Quick-Fence is a 45 deg, adjustable fence designed for fast and accurate angle cuts without using a wrench
- Ergonomically designed D-handle provides a more comfortable hand position, reducing fatigue and increasing productivity
- Heavy-duty, lock-down pin allows head of the saw to be locked in the carrying position without the use of a chain
DeWALT DCS334P1 Jig Saw Kit, Battery Included, 20 V, 5 Ah, 3/8 in Cutting Capacity, 1 in L Stroke, 0
D075-53176
- Brushless motor delivers efficient performance for longer runtime
- Bright LED helps illuminate dimly lit work surfaces
- Bright LED helps illuminate dimly lit work surfaces
- All metal, lever action keyless blade change allows for quick and easy T-shank blade changes
- 4 Position orbital action provides control of cut quality and speed
DeWALT Dragster DS321 Belt Sander, 7 A, 3 x 21 in Belt
D075-47945
- 7 A of power for maximum performance
- Angled belt design sands 3X closer to the edge of the adjoining surfaces
- Angled belt design sands 3X closer to the edge of the adjoining surfaces
- Retractable hood exposes top of sanding belt for use in a variety of applications
- 3-position adjustable handle provides comfort in different orientations
DeWALT DWE7491X Table Saw with Scissor Stand, 120 VAC, 15 A, 10 in Dia Blade, 5/8 in Arbor, 4800 rpm
D075-55682
- Rack and pinion telescoping fence system make fence adjustments fast, smooth and accurate
- 32-1/2 in RIP capacity easily cuts a variety of larger shelving and trim materials
- 32-1/2 in RIP capacity easily cuts a variety of larger shelving and trim materials
- 2-position flip over rip fence allows for narrow rip cuts and material support
- Site-Pro modular guarding system allows for tool-free adjustments of guarding components appropriate for each application
DREMEL 432 Sanding Band, 1/2 in Dia Drum, 1/8 in Dia Shank, 120 Grit, Coarse, Aluminum Oxide Abrasiv
D032-00432
- Removes rust from metal surfaces
- Shapes rubber surfaces
- Shapes rubber surfaces
- Requires a mandrel with a 1/8 in shank
- Do not run in excess of 30,000 rpm
DREMEL EZ Lock EZ409 Cut-Off Wheel, 1-1/2 in Dia, 0.02 in Thick, 1/8 in Arbor
D032-02747
- One-piece mandrel design eliminates the need for screw and screwdriver
- Effortless locking and loading, no tiny mandrel screw to lose
- Effortless locking and loading, no tiny mandrel screw to lose
- For cutting and reslotting screws
DREMEL 200-1/21 Rotary Tool Kit, 0.9 A, 1/8 in Chuck, Keyed Chuck, 2-Speed, 15,000 to 35,000 rpm Spe
D032-02951
- Two-speed control allows you to set your speed at 15,000 or 35,000 rpm with a flip of a switch
- Click-and-set On/Off switch allows precise speed selection
- Click-and-set On/Off switch allows precise speed selection
- Cool-running ball bearing construction for smooth and quiet operation
- Replaceable motor brushes extend tool life
DREMEL MM430 Multi-Knife Hook Blade, Bi-Metal
D032-03351
- Cut materials you never thought possible using your oscillating tool
- Unique, hooked blade design allows one-handed cutting
- Unique, hooked blade design allows one-handed cutting
- Dual push or pull blades permit cutting in either direction
- Make cuts in difficult to cut, flexible materials
DREMEL 662DR Drill Bit, 1/8 in Dia
D032-03010
- Drill holes in both flat and contoured glass
- Diamond-impregnated cutting bit for long life
- Diamond-impregnated cutting bit for long life
- Diamond grit around the circumference of the bit allows it to rasp a larger hole if needed
- Holes on the side of the bit allow the removal of material
Bosch BlueGranite Turbo HCBG08T Hammer Drill Bit, 1/4 in Dia, 12 in OAL, Milled Flute, 2-Flute, 1/4
D032-31348
- Upgraded build, delivers 5X life and 2X speed over standard masonry bits
- Power grip round shank, provides better grip for great speed
- Power grip round shank, provides better grip for great speed
- Four-grind head, delivers two more cutting angles for longer life and faster speed
- Multi-grind carbide centering tip, offers accurate starts in brick, masonry and more
Good Sense Air Freshener, Tuscan Garden, 16 oz Aerosol Spray, 6/Carton
D073-53961
- Water-based odor neutralizing formula.
- Atomized mist quickly travels throughout the sprayed area.
- Fast acting and instant deodorization.
Good Sense 30-Day Air Freshener, Fresh, 12/Carton
D073-53675
- Easy-to-use and maintenance free.
- Instantly freshens air anywhere odors are present.
- Refills last up to 30 days.
- Requires no batteries to operate.
Easy Fresh 2.0 Air Freshener, Citrus, 4.8 oz, 12/Carton
F011-95172
- Powerful enough to freshen larger areas.
- Freshens consistently for 30 days.
- Simple and convenient maintenance with an easy-to-use LED and audible reminders.
- Push button cover for quick removal and replacement.
- Use with the Easy Fresh dispenser.
Easy Fresh 2.0 Air Freshener, Apple, 4.8 oz, 12/Carton
F011-96381
- Powerful enough to freshen larger areas.
- Freshens consistently for 30 days.
- Simple and convenient maintenance with an easy-to-use LED and audible reminders.
- Push button cover for quick removal and replacement.
- Use with the Easy Fresh dispenser.
Bosch CRS180B Reciprocating Saw, Bare Tool, 18 V Battery, 1-1/8 in L Stroke, 0 to 2400, 0 to 2700 sp
B083-38958
- Compact design with a tool length of only 17.4 in for tight spaces
- Weighs only 6.35 lb great for overhead work
- Weighs only 6.35 lb great for overhead work
- Long 1-1/8 in stroke for more efficient material removal
- Best-in-class power-to-weight ratio
Bosch CSW41 Circular Saw, 120 V, 15 A, 1800 W, 7 in Dia Blade, 13 in Arbor, 53 deg Bevel
B083-39241
- Lightweight magnesium motor housing and foot plate construction lighter weight saw reduces user fatigue for less down time
- Built-in saw hook allows convenient saw storage between cuts
- Built-in saw hook allows convenient saw storage between cuts
- Featherboard multi-function wrench for blade and brush change, lever adjustments and blade diamond center knockout
- Accurate depth of cut system allows for quick accurate adjustment
Bosch ROS20VSC Random Orbit Sander, 120 V, 2.5 A, 5 in Pad/Disc, 7500 to 12,000 opm No Load
B083-43752
- Integral pad dampening brake system helps prevent swirl marks
- Bosch's hook-and-loop disc attachment delivers secure fit
- Bosch's hook-and-loop disc attachment delivers secure fit
- Micro-cellular backing pad for smooth, fine finishes
- Variable speed control to match speed to workpiece and task
Payment options
