Need More Help? 718-499-1119
Search
Power Tools
DREMEL 429 Polishing Wheel, 1 in Dia
D032-00429
- Ideal for general polishing of most ferrous metals, stones, glass and ceramics
- A felt accessory continually renews its own surface while being used
- A felt accessory continually renews its own surface while being used
- Felt polishing accessories may be used with or without polishing compound
- Use 414, 422 and 429 with mandrel 401
DREMEL MM600 Scraper Blade, 1-1/4 in, HCS
D032-02869
- Newly designed universal quick fit interface for compatibility with most oscillating tool brands
- Scraping-off old coats of paint or varnish or adhesives
- Scraping-off old coats of paint or varnish or adhesives
- Rigid scrapers are used for large area removal
- All multi-max accessories are max performance tested for endurance in real life applications so that you can feel confident that every multi-max accessory you buy will have proven value and performance
DREMEL EZ472SA Abrasive Brush, 1 in Bit Dia, 1/8 in Arbor/Shank
D032-02961
- Allows sanding of contours, details and hard-to-reach areas
- Built-in polishing compound, rubber bristles have abrasive inside and no need for polishing compound
- Built-in polishing compound, rubber bristles have abrasive inside and no need for polishing compound
- Removes exterior surface layer without damage to base layer below and removes the paint but not the wood with light pressure
- Used on sand delicate surfaces
DREMEL 512E Abrasive Buff, 1 in Dia, 7/64 in Thick
D032-02586
- First patented system of its kind
- Light sanding and tarnish removal - also great for car detailing and restoring door and window hardware
- Light sanding and tarnish removal - also great for car detailing and restoring door and window hardware
- Light sanding and tarnish removal - also great for car detailing and restoring door and window hardware
- Compatible with all Dremel rotary tools
DREMEL EZ Lock EZ545 Cutting Wheel, 1-1/2 in Dia, 0.023 in Thick, 1/8 in Arbor, Diamond Abrasive
D032-02749
- The Dremel EZ Lock makes accessory changes easy as pull, twist and release
- The one-piece mandrel design simplifies the process of changing cutting wheels and makes it easy to cut through plastic
- The one-piece mandrel design simplifies the process of changing cutting wheels and makes it easy to cut through plastic
- Straight cuts with little dust
- Easy to install
DREMEL EZ473SA Abrasive Brush, 1 in Bit Dia, 1/8 in Arbor/Shank, Rubber Bristle
D032-02962
- Allows sanding of contours, details and hard-to-reach areas
- Built-in polishing compound, rubber bristles have abrasive inside and no need for polishing compound
- Built-in polishing compound, rubber bristles have abrasive inside and no need for polishing compound
- Removes exterior surface layer without damage to base layer below and removes the paint but not the wood with light pressure
- Used on sand delicate surfaces
DREMEL 425-02 Polishing Disc, 1 in Dia, Emery Cloth Abrasive
D032-03562
- Ideal for general polishing of most ferrous metals, stones, glass and ceramics
- Use it to remove small burrs and scratch marks left by grinding and sanding
- Use it to remove small burrs and scratch marks left by grinding and sanding
- Ideal to clean and define grooves
- For cleaning and polishing coarse surfaces, to clean and define grooves
DREMEL 511E Abrasive Buff, Aluminum Oxide/Silicone Carbide
D032-02585
- Great for cleaning and light sanding
- Use on metal, glass, wood, aluminum and plastics.for use with the EZ402 EZ-lock mandrel or standard 402 mandrel
- Use on metal, glass, wood, aluminum and plastics.for use with the EZ402 EZ-lock mandrel or standard 402 mandrel
- Compatible with both EZ402 EZ lock mandrel and standard 402 mandrel
- Refinish furniture, clean grills, remove paint, tarnish and more
DREMEL 4486 Drill Chuck, 1/32 in Chuck, Steel, Dim Gray, Keyless
D032-01179
- Eliminate the collet and wrench when changing Dremel accessories
- Eliminate the collet and wrench when changing Dremel accessories
DREMEL 670-01 Saw Attachment
D032-01802
- Attaches to the rotary tool in seconds with Quick Connect System
- Attaches to the rotary tool in seconds with Quick Connect System
DREMEL 503 Flap Wheel, 3/8 in Dia, 1/8 in Arbor, 120 Grit, Fine, Emery Cloth Abrasive
D032-01182
- Flapwheels grind and polish flat or contoured surfaces
- Effective as finishing sander after heavy-surface sanding and material removal is complete
- Effective as finishing sander after heavy-surface sanding and material removal is complete
- 120-grit for fine finish sanding
- For grinding and polishing applications
DREMEL 570 Grout Removal Bit, 1/8 in Dia, 1-1/2 in L, 10 mm L Flute, 1/8 in Dia Shank, Steel
D032-01225
- Easily remove both wall and floor grout
- A high-speed cutter with a 1/8 in steel shank
- A high-speed cutter with a 1/8 in steel shank
- 30 deg angle for controlled cutting
- Guides 180 deg apart to keep bit centered
DREMEL 4000-2/30 Rotary Tool Kit, 120 V, 1.6 A, 1/32 to 1/8 in Chuck, Keyed Chuck, 5000 to 35,000 rp
D032-02977
- High-performance motor for maximum performance at all speeds
- Electronic feedback for consistent speed under load
- Electronic feedback for consistent speed under load
- Variable speed for greater versatility
- Can be used with all Dremel rotary tool accessories and most attachments
DREMEL 663DR Glass Drilling Bit, 1/4 in Dia, Glass Bit
D032-03011
- Drill holes in both flat and contoured glass
- Diamond-impregnated cutting bit for long life
- Diamond-impregnated cutting bit for long life
- Diamond grit around the circumference of the bit allows it to rasp a larger hole if needed
- Holes on the side of the bit allow the removal of material
DREMEL EZ Drum EZ407SA Mandrel, For: Dremel Rotary Tools and Model 408, 432, 445 1/2 in Sanding Band
D032-03121
- Provides a quicker and easier alternative to using a traditional sanding mandrel
- Allows for flat sanding and edge sanding
- Allows for flat sanding and edge sanding
DREMEL 192 Cutter, 3/16 in Dia, 1-1/2 in L, 1/8 in Dia Shank, HSS
D032-03523
- Appropriate for curved surfaces
- A versatile, high-quality cutter made of high-grade steel
- A versatile, high-quality cutter made of high-grade steel
- For shaping, hollowing, grooving, slotting, inlaying, making tapered holes
DREMEL 9931 Cutter, 1/4 in Dia, 1-1/2 in L, 1/8 in Dia Shank, Tungsten Carbide
D032-09931
- Sharp teeth for greater material removal
- Fast cutting
- Fast cutting
- Fast cutting
- For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down this provides plenty of shank for the collet or chuck to hold onto the bit
Dremel Ultra Saw US40-04 Corded Compact Saw Tool Kit with 3 Cutting Wheels and Auxiliary Handle
D032-05834
- 7.5 A power for faster cutting and tougher applications
- Three-in-one tool for plunge cutting, flush cutting and surface preparation applications including rust, paint and thinset removal
- Three-in-one tool for plunge cutting, flush cutting and surface preparation applications including rust, paint and thinset removal
- Improved drive train lasts 3X longer than the Saw-Max and metal foot and guard handle tough applications
- Excellent line of sight for precise, confident cuts
DREMEL 9924 Engraving Point, Carbide
D032-09924
- Designed for normal engraving applications
- Ideal for dozens of hobbies and crafts
- Ideal for dozens of hobbies and crafts
- Create fine lines to deep grooves
- Carbide point for the Dremel engraver
Bench Grinder, 8 in, 3/4 hp, Phase 1, 3600 RPM
D075-07580
- 12 1/2" distance between wheels for longer and larger grinding applications
- Adjustable tool resets
- Industrial cast iron base and motor housing provide durability and prolong life
- Precision-machined aluminum tool rests allow the user to accurately position work
- Rear exhaust ports in wheel guards for smoother operation
DeWALT DWX726 Rolling Miter Saw Stand, 300 lb, 98 in W Stand, 32-1/2 in H Stand, Steel, Black/Yellow
D075-26100
- Easily adjustable mounting rails adapt to nearly any miter saw
- 3-position pneumatic assisted raising and lowering for the ultimate in flexibility and ease of set up
- 3-position pneumatic assisted raising and lowering for the ultimate in flexibility and ease of set up
- Compact vertical storage option maximizes workplace efficiency and ease of transport
- Wide rubber grip wheels provide easy jobsite mobility
BLADE RECIP SAW 14/18TPI 12IN
D075-25462
- Proprietary coating provides 2X longer life
- 1 in tall blade body and 0.042 in blade thickness wide and thicker blade for added durability and prevents bending and breakage
- 1 in tall blade body and 0.042 in blade thickness wide and thicker blade for added durability and prevents bending and breakage
- Variable pitch 14/18 TPI unique back angle geometry provides the most efficient cutting performance
DeWALT DCS380B Reciprocating Saw, Tool Only, 20 V, 4 Ah, 1-1/8 in L Stroke, 0 to 3000 spm
D075-26233
- 4-position blade clamp allows for flush cutting and increased positional versatility with tool-free blade changes
- Variable speed trigger with 3000 spm provides increased blade control and fast cutting speed
- Variable speed trigger with 3000 spm provides increased blade control and fast cutting speed
- Rubber overmolded comfort grip delivers optimal comfort and control
- 1-1/8 in stroke length delivers a fast cutting speed
DeWALT DWE575SB Circular Saw, 120 V, 15 A, 1950 W, 7-1/4 in Dia Blade, 5/8 in Arbor, 57 deg Bevel
D075-26922
- Among the lightest saws in its class 8.8 lb
- 57 deg beveling capacity with stops at 45 deg and 22.5 deg
- 57 deg beveling capacity with stops at 45 deg and 22.5 deg
- Lower guard design improves performance when making bevel and narrow cuts
- An integrated dust blower allows the user to clear its line of sight while cutting
Payment options
